tvss

Type 2 AC surge arrester designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher. High Discharge Capacity with 8/20 us waveform, Imax 100kA SPD Reliable supervision due to disconnection device Fast response Visual status indication and remote signal contact available.

Type 2 AC surge arrester designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher. Comply with IEC 61643-11. apply to single phase TT and TN systems Surge Protector High Discharge Capacity with 8/20 µs waveform, Imax 150kA Reliable supervision due to disconnection device Fast response Visual status indication and remote signal contact available

PROSURGE® PSPF series panel SPDs are compact Surge Protective Devices (SPDs) with nominal discharge current 20,000A (8/20μs), designed to protect single and multi-phase electrical distribution systems against the harmful effects of transient surges.  UL 1449 5th & CSA C22.2 listed Type 1 SPD with SCCR up to 200kArms without external fuse or CB  Prosurge Patented SCCR 200kArms thermally protected MOV technology( 20PTMOV) as key component  Nominal discharge current 20,000A 8/20μs per mode  Full modes protection  High surge energy capability up to 50,000A per phase /mode with compact size  Low voltage protection rating  Failure indication  Threaded NPT  Waterproof plastic enclosure to resist dirt, dust and water

PROSURGE® POSP 20 series plug-on SPDs are heavy-duty UL Type 1 Surge Protective Devices (SPDs) with nominal discharge current up to 20,000A, designed for whole-house protection of electronics and electrical circuits to against the risk of harmful effects of transient surges  UL 1449 5th Edition Classified Type 1 SPDs with SCCR 10kArms without external fuse or CB  Prosurge Patented SCCR 200 kArms thermally protected MOV technology(PTMOV) as key component  Nominal discharge current 20,000 A 8/20μs per mode  50,000 A 8/20μs surge current capacity for suppression of high-energy surges  Quick plug-in design fits mainstream 1-inch pitch load centers, occupies two pole spaces and installs easily. (see Load Center Compatibility List below)  Superior surge suppression performance by eliminating lead lengths.  Full mode protection  Easy-to-Understand LED failure indicator

PROSURGE 20PSPE series panel SPDs are extra compact UL listed Surge Protective Devices (SPDs) designed to protect single phase and multi-phase electrical distribution systems against the harmful effects of transient surges. Features:  UL 1449 5th Type 1 SPDs with SCCR up to 200kArms without external fuse or CB  Nominal discharge current: 10kA(8/20μs)  Max surge current: 50~100kA (8/20μs) per phase  Short circuit current rating SCCR: 200kArms - tested without external CB or fuse  Full modes protection  Low voltage protection rating  Degradation failure indication.  NEMA 4X enclosure

IEC61643-11 Type 2 AC surge arrester designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher. Comply with IEC 61643-11. MOV technology suitable for various protection application Pluggable design, easy replaced without any tools. High Discharge Capacity with 8/20 us waveform, Imax 60kA Visual status indication and remote signal contact available.

PROSURGE PSPB series panel SPDs are compact size UL listed Surge Protective Devices (SPDs) designed to protect single and multi-phase electrical distribution systems against the harmful effects of transient surges. Features:  UL 1449 5th &CSA C22.2 Type 1 SPDs with SCCR up to 200kArms without external fuse or CB  UL 1449 5th &CSA C22.2 Type 2 SPDs with Sine Wave Tracking  Nominal discharge current: 10kA (8/20μs)  Max surge current: 50kA (8/20μs) per phase  Short circuit current rating SCCR: 200kArms - tested without external CB or fuse  Full modes protection  Degradation failure indication  With Remote Alarm optional  NEMA 4X plastic enclosure

Type 2 AC surge arrester designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher. Comply with IEC 61643-11, apply to single phase TT and TN systems (“1+1” circuit). High Discharge Capacity with 8/20 us waveform, Imax 120kA Reliable supervision due to disconnection device Fast response Visual status indication and remote signal contact available.

Type 3 AC surge arrester with internal fuse design is especially for low voltage system protection against surges at the boundaries from lightning protection zone 1-2 and higher. Comply with IEC 61643-11 Inbuilt fuse in series with MOV design for more reliable over-current protection Failure indicators on both MOV and internal Fuse With window indication to indicate the internal thermal disconnector With optional remote alarm contact